วิธีการ upgrade IAM/IAG และตรวจสอบหลัง upgrade
ใช้เวลาโดยรวมประมาณ 1 ชั่วโมง 30 นาที
เตรียมความพร้อม. , ใช้เวลาประมาณ 5 นาที
-
Download Sangfor Updater Tools 6.2 (ห้ามใช้ 6.4 สำหรับ aDesk):
https://support.sangfor.com/productTool/detail?id=11&category_id=0
-
Download Firmware IAG
Firmware:
https://support.sangfor.com/productSoftware/list?product_id=22
Release note:
https://support.sangfor.com/productDocument/read?product_id=22&version_id=1393
-
(ถ้ามีการใช้งานการเก็บ log ภายนอก) Download External Sangfor Business Intelligent
Firmware:
https://support.sangfor.com/productSoftware/list?product_id=22&category_id=4 - ขั้นตอนทำการ backup configuration files:
https://support.thailand.sangfor.com/hc/th/articles/4406544479257
ชั้นตอนการ Upgrade Firmware IAM/IAG, ใช้เวลาประมาณ 40 นาที ต่อหนึ่งอุปกรณ์
ในกรณี HA แบบ Active-Standby ให้ทำการ upgrade ตัว Active เป็นตัวแรก
ก่อน upgrade disable HA, และ Disable หรือ disconnect port productions
ในกรณี HA แบบ Active-Active ให้ทำการ upgrade ตัว Active เป็นตัวแรก
ก่อน upgrade disable HA- Login ด้วย Admin Account
-
เปิด port ให้ updater สามารถ connect เข้าได้ System -> General -> Advanced -> Remote Tech Support -> คลิ้ก Enable Firmware updater
-
ใช้ Sangfor Updater tools connect และ Upgrade Firmware (กด F10 เพื่อดูรายละเอียด)
- หากมี package precheck ให้ติดตั้ง precheck ให้ผ่านก่อน
- จากนั้น Upgrade ด้วย Upgrade Package จริง
-อาจจะมีบางช่วงขึ้น device disconnected ให้รอดูก่อน
ในกรณีมี Error เกิดขึ้น ห้าม reboot อุปกรณ์ และติดต่อ Sangfor โดยทันที - อุปกรณ์จะ reboot ตัวเองหลัง Upgrade Firmware ทันที (กรณีเป็น Patch อาจไม่ต้อง reboot อุปกรณ์)
- รอประมาณ 5 นาที เข้า admin ui และตรวจสอบความเรียบร้อย
- หลัง boot ระบบจะทำการcheck disk ทำให้disk ขึ้น100% ถือว่าปกติ ให้รอ1ชั่วโมงจะกลับมาปกติ - ตรวจสอบ Version ที่Upgradeไปได้ที่
การตรวจสอบ version ฉบับเต็มของ IAG
ในกรณี HA แบบ Active-Standy หลังจาก upgrade ตัว Active ตัวแรกเรียบร้อย
1.ให้ยังคง disable HA, และ Disable/Disconnect port productions ของตัว standby
2.Enable/Connect port productions ของตัว Active
3.ทำการ upgrade อุปกรณ์ standby ตาม step upgrade
4.หลังจาก upgrade เรียบร้อยแล้ว
5.เปิด function HA และ Enable/Connect port productions ของตัว Standby
ในกรณี HA แบบ Active-Active หลังจาก upgrade ตัวที่ 1 เป็นตัวแรกเรียบร้อย
1.ทำการ upgrade ตัวที่ 2
2.หลังจาก upgrade เรียบร้อยแล้ว
3.เปิด function HA
ชั้นตอนการ Upgrade Firmware External Sangfor Business Intelligent, ใช้เวลาประมาณ 30 นาที
- RDP เข้า Server External Sangfor Business Intelligent
- แตก zip และ เปิดโปรแกรม exe ที download มา
- ทำตามขั้นตอนตาม UI
- Login เช็คความเรียบร้อย
ข้อคิดเห็น
0 ข้อคิดเห็น
โปรด ลงชื่อเข้าใช้ เพื่อแสดงข้อคิดเห็น